ACCESSORIES
!

LEE AUTO PRIME (NEW TYPE)

Fastest,most accurate priming tool made.  

You never touch the primers from the box to the shell. Automatically feeds and installs primers just as fast as you can place shells in the holder. Each primer is perfectly seated with the feel appreciated by precision reloaders. Built-in-primer flipper turns them right side up. Simply dump the primers in the tray, shake lightly, replace cover and you're ready to prime 100 shells. Uses low cost, easy to change shell holders.

  • Includes both large and small trays

case conditioning (1)

The Lee Case Trimmer is the simplest way to check the case and trim to the correct safe length.

After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud works for all calibres. You will need only one.                        The Case Length Gauge (Pilot) and shell holder must be ordered for each calibre. Trim cases by hand or use with an electric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit.

CASE LENGTH GAUGE & SHELL HOLDER

  • Trims case square & true to the exact length
  • Steel stop pin will retain its accuracy forever
  • Other calibres available; if your requirement is not on the list please phone.

CHAMFER TOOL

  • Must be used after case trimming
  • Unique design cuts fast without chatter
  • One turn does the job required
  • Chamfers and deburrs inside and outside of case necks

CUTTER & LOCK STUD

3 JAW CHUCK

Works with any case from 25 acp to the largest belted magnums. Three hardened steel jaws gently centre the case while the spindle lock the case head.Cases are installed and removed with the fraction of a turn.

For use with the Spinner Stud (90607) or Zip Trim (90899)

CUTTER ONLY WITH BALL GRIP

LOCK STUD

Optional case spinner spindle with drill shank for use with the 3 jaw chuck, turns any electric drill into a high speed case polisher / lathe.

Also works great to hold cases for neck turning or trimming