KG INDUSTRIES - CLEANING
KG Industries LLC is your one-stop shop for high-grade metal coatings, cleaners, and lubricants. We offer a vast selection of products that can be used for different applications in a variety of industries.
!

KG 1 CARBON REMOVER

KG-1 was the first product introduced to the shooting sports industry to specifically meet the need to remove carbon buildup and is the first step in the cleaning process. KG-1 is formulated to be environmentally friendly and contains no ammonia. Recommended for use by several barrel makers. KG-1 is pH neutral and is ideal for removing carbon from black powder rifles, centerfire, rimfire, automatic and gas assisted weapons.

KG 2 BORE RESTORE

KG-2 was originally developed to maintain the bore integrity of sniper rifles. Unlike most other mechanical products, KG-2 contains no ammonia and is a 1200-1400grit soft compound to remove copper and lead, while leaving the integrity of the bore. In most cases KG-2 will perform exceptionally well in removing copper and lead with quality patches, however, in some cases, nylon brushes are recommended. Based on the theory of removing the copper and lead from the lands and groves only, while simply smoothing over the impregnated copper and lead in the micro-fractures of the bore, KG-2 will help reduce the need for fouling shots and it is recommended and used by SWAT and sniper teams. KG-2 is an ideal product for fire polishing (A technique producing a finer finish than Fire Lapping).

 

KG 3 SOLVENT DEGREASER

KG-3 is a non-chlorinated ozone safe formula used to remove the residue loosened by KG-1, KG-2, KG-12 and for cleaning and degreasing parts. KG-3 contains a special formulation of fast drying, water-displacing solvents which will rapidly cut through oil and grease without leaving a residue.

19 oz SPRAY CAN

KG 4 GUN OIL

KG-4 Gun Oil meets the stringent requirements set forth in the original Military Specification Mil-L-63460 D. It is a blend of the finest lubricants available and contains no synthetics. With very low surface tension, KG-4 exhibits excellent lubrication and provides outstanding corrosion protection. KG-4 has the added property of keeping current firing residue in suspension which allows for easier cleaning. KG-4 has been field tested for endurance using 50 caliber machine guns. Initially the 50's were experiencing stoppages at 750 to 1000 rounds. After using KG-4 (CLP2) the guns were fired and stopped at 6000 rounds due to heat and to clean the weapons.

KG 5 TRIGGER LUBE

KG-5 Trigger Lube is formulated specifically for trigger mechanisms. It is a blend of the finest lubricants available, including P.T.F.E. KG-5 provides excellent lubrication and corrosion protection. KG-5 will keep trigger pulls even and smooth and has been field tested by Military and Police personnel, and has proven itself to be a superior product.

KG 6 MOLY BORE PREP

KG-6 was developed to offer the advantages of Moly to both re-loaders and those who buy factory ammo. KG-6 is unlike the greases you are used to seeing. Formulated with Molybdenum Disulfide suspended in a fine oil, our finished product is a superior lubricant that does not need to be shaken and has a natural affinity for metal. KG-6 will embed a very thin film of Moly onto the bore that will aid in less bore fouling. Most shooters today are reporting 50 to 100 round strings without loss in group size or a need to clean.

KG 7 MOLY POWDER

KG Products is now offering for sale the same Molybdenum Disulfide used in our Bullet Kote, Gear Kote, and Gun Kote. This is simply the best quality Molybdenum available on the market today. There are only three grades of Molybdenum Disulfide: Technical Grade, Technical Fine and Super Fine or what used to be known as Suspension Grade. KG products uses only the finest Suspension Grade or Technical Fine grades available. We have to! Our coatings are used by some of the best racers and gunsmiths around the world! Both Technical Fine and Super Fine powders work in all tumbler applications.

KG 9 MICRO PTFE LEATHER KOTE

By incorporating our new micro technology P.T.F.E. and a combination of fine silicone lubricants in a fully suspended formulation, KG Industries has developed one of the finest leather lubricants on the market today. The lower friction coefficient of KG-9, once burnished into the leather, will dramatically reduce the leather wear on your firearm or knife finish.

KG 10 MOLY DRY LUBE

KG-10 Moly Dry film Lubricant is a highly effective MOS2 multi-purpose lubricant which greatly reduces friction and wear. KG-10 goes on wet, penitrates into the metal, drys leaving a pure Moly dry film that will protect and lubricate without attracting dirt or dust. Use KG-10 Dry Lube where a dry no-mess lubricant is required i.e. Triggers, slides, etc...

KG 11 MOLY GREASE

KG's New Moly Grease is based on the formulation of our KG-4 Gun Oil and Technical Fine Grade Molybdenum disulfide powder. The result of blending these two fine products produced a grease which will provide a lubricant that will reduce wear and prevent seizure of dissimilar metals and other alloys in sliding motion parts. KG-11 Moly Grease is appropriate for use, but is not limited to many applications in the Automotive, Motorcycle and Firearms Industries. Most impressive is the amount of pressure KG-11 will bear and holding true to our products being limited to only your imagination, KG-11 Moly Grease can also be used as an anti-seize compound for threads of steel nuts and bolts in heavy industries.